Skip Ribbon Commands
Skip to main content
 
      

Operations

Ammunition Operations

Subtopics:

References:

  • AMC-R 350-4 Training and Certification Program for Personnel Working in Ammunition Operations, dated 22 November 2017 This regulation establishes a training and certification program for personnel involved with planning, handling, storage, surveillance, maintenance, production, demil/destruct/treatment and transportation operations of ammunition and explosives (A&E) in accordance with (IAW) DA PAM 385-64 (Ammunition and Explosive Safety Standards) and IAW DA PAM 385-61 (Toxic Chemical Agent Safety Standards) for toxic and chemical agents and munitions. It requires that installations and activities ensure that only trained and certified personnel are permitted to participate in operations involving munitions. This program is designed to increase munitions safety awareness, technical knowledge and operational proficiency of employees. For clarity, within this regulation, A&E refers to all live explosives, components, packaging, dummy/drilled/inert filled and non-standard conventional and toxic chemical munitions, as well as large rockets and guided missiles.
  •  AMC-R 700-77 Installation Ammunition Support dated 12 June 2017  gives detail to regulatory guidance and responsibilities for the various agencies or activities that are involved in the management and handling of ammunition.  It establishes policies, procedures and responsibilities for ammunition management, support organizations and customers supported by these activities.
  • DA PAM 700-16 The Army Ammunition Management System This Department of the Army pamphlet provides an overview of the Army Ammunition Management Program, key procedures, and references. It is designed to describe the system and basic procedural guidance for full life cycle ammunition management and is to be used in conjunction with applicable references for ammunition management. This includes ammunition research, development, and acquisition; distribution, storage, and maintenance; and production base readiness, management, and stock control procedures.
  • Joint Conventional Ammunition Policies and Procedures October 2017 Objectives of the SMCA mission, as stated in reference (a), are to achieve the highest possible degree of efficiency and effectiveness in the DoD operations required to acquire top quality conventional ammunition, and also in the wholesale conventional ammunition logistics functions. The guidance known collectively as JCAPPs is aligned with the topical paragraphs of DoDI 5160.68 (reference (c)); is in consonance with the authorities and responsibilities assigned in the SMCA Charter (reference (d)); is jointly developed, approved, and published by the JOCG; and reflects agreements among the Military Services and SMCA to achieve these objectives.
  • Ammunition Reference Guide  - The newest version of the Ammunition Reference Guide is now available! It is now in an online version and easy to keep updated by you the Ammunition Community. It is a powerful tool and a living knowledge bank where experts are encouraged to contribute their experience and update information as it happens. It allows users to integrate and interlink knowledge into topical-based articles and collaborate on issues up to and including UNCLASSIFIED/FOUO documentation.
  •  
  
  
  
  
  
SALS-K 700-1 Change 1 Single Ammunition Logistics System - Koresa 1-7-2020.pdf
  
Reference6/29/2020 8:49 PM
Conventional Ammunition Inspection Interval and Priority List (10 June 2020).aspx
  
Report6/15/2020 2:39 PM
Ammo Identification Guides.aspx
  
Reference5/28/2020 8:46 AM
Foreign Production Codes and Markings for Small Arms Ammo.pps
  
Presentation5/28/2020 8:45 AM
Expended CAT I and CAT II NSNs and DODICs as of 20160418.aspx
  
Reference5/27/2020 4:27 PM
HQDA G-4 Approved Munitions Serialization List - 14 April 2020.aspx
  
Report5/27/2020 3:55 PM
Waste Profile Notices 1.pdf
  
Reference5/27/2020 3:54 PM
FY20 Automatic Returns List.aspx
  
Reference5/27/2020 3:53 PM
DA PAM 700-145 Item Unique Identification Procedures.aspx
  
Reference5/27/2020 11:26 AM
AIN 031-20, DISPOSITION INSTRUCTIONS FOR UNSERVICEABLE NON-STANDARD AMMUNITION.aspx
  
Reference5/13/2020 8:58 AM
OPORD 12-195 Item Unique Identification (IUID).aspx
  
Reference5/4/2020 4:25 PM
Army Directive 2016-21 (Interim Policy for Serialized Item Management).aspx
  
Reference5/4/2020 4:24 PM
AMC Serialize Item Management (SIM) Policy Memo.aspx
  
Reference5/4/2020 4:23 PM
Next Generation Delivery Service (NGDS) COVID-19 Signature Service Update.pdf
  
Reference4/27/2020 2:02 PM
CAPULDI Text updated by DAC 22 April 2020.txt
  
Report4/27/2020 9:23 AM
CAPULDI excel updated by DAC 22 April 2020.xlsx
  
Report4/27/2020 9:23 AM
Foreign Military Sales (FMS) of Ammunition and Explosives (AE) CA 20 03 27 0035.pdf
  
Report4/13/2020 1:49 PM
Port Links Listing 2-20-2020.pdf
  
Report4/8/2020 4:37 PM
AOP-2 C The Identification of Ammunition.aspx
  
Reference4/8/2020 4:37 PM
Ammunition Tool Kit.pdf
  
Reference3/26/2020 9:16 AM
AIN 047-19 USE OF UNSERVICEABLE AMMO FOR EMERGENCY DESTRUCTION AND COMBAT DISPOSAL TRAINING.aspx
  
Reference3/19/2020 3:09 PM
MIL STD 129R Military Markings for Shipment and Storage.aspx
  
Reference3/11/2020 4:26 PM
Depleted Uranium Shipping Training Part 1 of 3.aspx
  
Learning Material3/11/2020 10:05 AM
Depleted Uranium Shipping Training Part 2 of 3.aspx
  
Learning Material3/11/2020 10:05 AM
Depleted Uranium Shipping Training Part 3 of 3.aspx
  
Learning Material3/11/2020 10:04 AM
Small Arms, Document Ammo Malfunctions.docx
  
Learning Material3/5/2020 9:44 AM
AIN 019-20 CHANGE TO 49 CODE OF FEDERAL REGULATION (CFR).docx
  
Reference3/3/2020 2:35 PM
JMCR 702-2 Aug 13  Inspection of Supplies and Equipment Ammunition Surveillance Procedures.pdf
  
Reference2/27/2020 10:45 AM
AR 5-13 Army Munitions Requirements and Prioritization Policy.aspx
  
Reference2/19/2020 9:20 AM
Tactical Explosives Safety Quick Reference Guide June 5 2019.pdf
  
Reference2/19/2020 9:18 AM
1 - 30Next