Skip Ribbon Commands
Skip to main content

Product Design

        This area shall contain information on areas of product design for PQM to include but not limited to, the following:

Product Architecture:

  • Integral Design
  • Modular Design


  • Process Availability
  • Process Capability
  • Component Standardization
  • Piece Part Reduction
  • Tooling Concept
  • Key Performance Parameters
  • Key Design Characteristics

Note: The inclusion of related websites is provided as an initial list of sources of potentially valuable information.  These links are not inclusive and are not intended to endorse any individual website. 

Introduction to Variability and Variation Reduction REV Jan05.doc
Reference5/5/2015 6:00 PM
Reference2/18/2014 6:40 PM
Producibility Goals and Objectives.aspx
Reference8/22/2013 11:33 AM
Producibility Engineering and Planning.aspx
Reference8/22/2013 11:31 AM
MOSA AT L Article.pdf
Reference8/3/2010 7:54 PM
Modular Design and Technology Insertion CNO.aspx
Reference8/3/2010 7:51 PM
Manufacturing Questions a PM Should Ask.aspx
Reference8/2/2010 8:25 PM
Critical Program Information Protection.aspx
Reference9/7/2009 8:28 PM
Process Capability - Engineering Statistics Handbook.aspx
Reference2/12/2007 5:46 PM
Manufacturing - the form of things unknown.aspx
Reference2/12/2007 4:14 PM
keycharMMcop 2.ppt
Presentation2/12/2007 3:26 PM
Design Build Producibility.ppt
Presentation2/8/2007 7:21 PM